The 750-352 from Wago is a light grey colour 10/100Mbit/s Ethernet fieldbus coupler. This coupler connects Ethernet to modular Wago I/O system. It automatically configures and creates local process image which may include analogue, digital or specialty modules. Analogue and specialty module data is sent via words or bytes and digital data is sent bit by bit. Two Ethernet interfaces and an integrated switch allow fieldbus to be wired in a line topology. This eliminates additional network devices such as switches or hubs. Both interfaces support auto negotiation and auto‐MDI(X). The coupler is designed for fieldbus communication in both Ethernet/IP and MODBUS networks. It also supports a wide variety of standard Ethernet protocols (HTTP, BootP, DHCP, DNS, SNMP, FTP). The coupler has an integrated supply terminal for system voltage. The field power jumper contacts are supplied via a separate supply module.
64 I/O modules
Configuration via PC and 2 x RJ45 bus coupler connections
Power supply voltage of 24VDC (-25% to 30%)
Typical input current of 280mA at 24V rated load
Dimension is 50mm x 65mm x 97mm (W x H x L)
Total current for I/O modules is 700mA at 5V
Approved by UL 508, CE, ANSI/ISA 12.12.01 and ATEX/IECEx standards
CAGE CLAMP connection technology and 35mm DIN rail mounting
IP20 degree of protection
Operating temperature range from 0°C to 55°C
The device is equipped with electronic components that may be destroyed by electrostatic discharge when touched. Please observe safety precautions as per DIN EN 61340-5-1/-3 while handling the device.
All power sources to the device shall be switched off prior to performing any installation, repair or maintenance work.
These terms and conditions are for reference only. The actual terms and conditions are subject to the sales staff's quotation.
- Please check the technical specifications of the products when ordering.
- MOQ is the minimum order quantity required to purchase each part.
- If you have special ordering instructions, please indicate them on the order page.
- Pre-Shipment Inspection (PSI) will be used when ordering.
- You can check the status of your order in the “My Order” section of your personal account.
- Orders cannot be canceled after the package has been shipped.
View more >
- Works with both individual and corporate clients. View more >
- All prices on the website include 22% VAT.
- Invoices are issued in the currency specified, but payment is made in Russian rubles at the exchange rate on the day of payment.
- If you need a detailed invoice or a tax identifier, please contact us.
- Delivery will take between 1 to 2 weeks after the shipment is sent to your country.
- Your order will be processed only after the invoice has been paid.
- The tracking number will be sent to you after the order is shipped. (It may take up to 24 hours for the information to be available from the carrier.) View more >
- Carefully tested and packaged by ChipWorker- Vacuum packed - Anti-static packaging - Anti-vibration foam
- Income quality control (IQC), 800+ qualified distributors.
- Authorities test the chip to ensure the quality, authenticity and safety of your device.
- Decapsulation control
- X-ray inspection
- XRF inspection
- Electrical testing
- Surface testing
Contact Us
Contact us today and a sales representative will provide you with a quote for any model.
Customer Service, Quick Links
Find immediate assistance and access to our most used services through our Quick Links. Your satisfaction is our priority.