The ADN8835 is a monolithic TEC controller with an integrated TEC controller. It has a linear power stage, a pulse-width modulation (PWM) power stage, and two zero-drift, rail-to-rail chopper amplifiers. The linear controller works with the PWM driver to control the internal power MOSFETs in an H bridge configuration. By measuring the thermal sensor feedback voltage and using the integrated operational amplifiers as a proportional integral differential (PID) compensator to condition the signal, the ADN8835 drives current through a TEC to settle the temperature of a laser diode or a passive component attached to the TEC module to the programmed target temperature.
The ADN8835 supports negative temperature coefficient (NTC) thermistors as well as positive temperature coefficient (PTC) resistive temperature detectors (RTDs). The target temperature is set as an analog voltage input either from a digital-to-analog converter (DAC) or from an external resistor divider.
The temperature control loop of the ADN8835 is stabilized by PID compensation utilizing the built in, zero-drift chopper amplifiers. The internal 2.50 V reference voltage provides a 1% accurate output that biases a thermistor temperature sensing bridge as well as a voltage divider network to program the maximum TEC current and voltage limits for both the heating and cooling modes. With the zero-drift chopper amplifiers, excellent long-term temperature stability is maintained via an autonomous analog temperature control loop.
**Applications**
TEC temperature control
Optical modules
Optical fiber amplifiers
Optical networking systems
Instruments requiring TEC temperature control
### Features and Benefits
High efficiency single inductor architecture
Integrated low RDSON MOSFETs for the TEC controller
TEC voltage and current operation monitoring
No external sense resistor required
Independent TEC heating and cooling current-limit settings
Programmable maximum TEC voltage
2.0 MHz (typical) PWM driver switching frequency
External synchronization
Two integrated, zero-drift, rail-to-rail chopper amplifiers
These terms and conditions are for reference only. The actual terms and conditions are subject to the sales staff's quotation.- Please check the technical specifications of the products when ordering. - MOQ is the minimum order quantity required to purchase each part. - If you have special ordering instructions, please indicate them on the order page. - Pre-Shipment Inspection (PSI) will be used when ordering. - You can check the status of your order at any time by emailing us. - Orders cannot be canceled after the package has been shipped.
- TT in advance (bank transfer), PayPal can be selected. - Cash transfer only. (Transfers using checks and invoices are not accepted.) - The customer is responsible for paying all applicable fees, including sales tax, VAT, customs, etc. - If you need a detailed invoice or tax ID, please email us.
- Choice of CDEK, EMS, Itella, SHIPTOR, STD Express, SPSR-EXPRESS - You can choose how you will be charged for shipping - through your shipping account or by us. - For remote areas, please check with the logistics company in advance. (Additional charges may apply in these areas)- Delivery Time: Typically 2 to 7 business days. - A tracking number will be sent after the order has been shipped. (It may take up to 24 hours for the carrier to display the information.)
- Carefully tested and packaged by ChipWorker- Vacuum packed - Anti-static packaging - Anti-vibration foam
- Income quality control (IQC), 800+ qualified distributors. -Authorities test the chip to ensure the quality, authenticity and safety of your device. - Decapsulation control - X-ray inspection - XRF inspection - Electrical testing - Surface testing -800 m² digital component warehouse, constant temperature and humidity
Contact Us
If you order before 14:00 (UTC+8), in-stock items can be shipped today. Depending on the location of the warehouse, shipment can be made within 1-5 days. Contact us today and a sales representative will provide you with a quote for any model.