LPC43S57JET256E - NXP

The pictures are for reference only, and the specific specifications can be found in the product manual.

Part No

LPC43S57JET256E
Manufacturer

NXP
ChipWorker Part#

CW60724208
Category

Microcontroller, MCU IC
Package

LBGA-256
Description

32Bit ARM Cortex-M4/M0 MCU; 1Mb flash and 136KB SRAM; Ethernet, 2 x USB, LCD, EMC, AES engine
Documentation

Datasheet

LPC43S57JET256E Global Supplier

{{ supplierTable.supplier }}	{{ supplierTable.part }}	{{ supplierTable.availability }}	MOQ	{{ supplierTable.delivery_date }}

{{viewMore}}
{{viewMore}}
DigiKey	{{noList.partNo}} {{noList.mfr}}	0 {{ search_item }}	-	{{outStock}}
Arrow	{{noList.partNo}} {{noList.mfr}}	0 {{ search_item }}	-	{{outStock}}
Mouser	{{noList.partNo}} {{noList.mfr}}	0 {{ search_item }}	-	{{outStock}}
					{{submitRFQ}}

LPC43S57JET256E Specifications

Attribute	Attribute Value

Part Number	LPC43S57JET256E
Manufacturer	NXP
ChipWorker Part#	CW60724208
Category	Microcontroller, MCU IC
Documentation	Datasheet
Number of Pins	256 Pin
Case/Package	LBGA-256
Supply Voltage (DC)	2.60V (min)
Number of Positions	256 Position
Clock Speed	204 MHz
RAM Memory Size	136 KB
Number of Bits	32 Bit
Power Dissipation	1500 mW
FLASH Memory Size	1024 kB
Number of ADCs	2 ADC
Number of Inputs and Outputs	164 Input IO
Operating Temperature (Max)	105 ℃
Operating Temperature (Min)	-40 ℃
Power Dissipation (Max)	1500 mW
Number of DACs	1 DAC
Supply Voltage	2.4V ~ 3.6V
Supply Voltage (Max)	3.4 V
Supply Voltage (Min)	2.6 V
	expand all
Weight	743.44102583 mg
Operating Temperature	-40℃ ~ 105℃
Product Lifecycle Status	Pre-Release
Packaging	Tray
RoHS	RoHS Compliant
Lead-Free Status	Lead Free
REACH SVHC Compliance Edition	2015/12/17

Product Description

Overview
The LPC43S57JET256 is a ARM Cortex-M4 based microcontroller for embedded applications which includes an ARM Cortex-M0 coprocessor, 1 MB of flash and 136 kB of on-chip SRAM, 16 kB of EEPROM memory, security features with AES engine, a quad SPI Flash Interface (SPIFI), advanced configurable peripherals such as the State Configurable Timer (SCT) and the Serial General Purpose I/O (SGPIO) interface, two High-speed USB controllers, Ethernet, LCD, an external memory controller, and multiple digital and analog peripherals. The LPC43S57JET256 operates at CPU frequencies of up to 204 MHz.
The ARM Cortex-M4 is a 32-bit core that offers system enhancements such as low power consumption, enhanced debug features, and a high level of support block integration. The ARM Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals, and includes an internal prefetch unit that supports speculative branching. The ARM Cortex-M4 supports single-cycle digital signal processing and SIMD instructions. A hardware floating-point unit is integrated in the core. The ARM Cortex-M4 with floating-point unit is often referred to as M4F.
The ARM Cortex-M0 coprocessor is an energy-efficient and easy-to-use 32-bit core which is upward code- and tool-compatible with the Cortex-M4 core. The Cortex-M0 coprocessor, designed as a replacement for existing 8/16-bit microcontrollers, offers up to 204 MHz performance with a simple instruction set and reduced code size.
MoreLess
## Features
* Cortex-M4 Processor core
* ARM Cortex-M4 processor (version r0p1), running at frequencies of up to 204 MHz.
* Built-in Memory Protection Unit (MPU) supporting eight regions.
* Built-in Nested Vectored Interrupt Controller (NVIC).
* Hardware floating-point unit.
* Non-maskable Interrupt (NMI) input.
* JTAG and Serial Wire Debug (SWD), serial trace, eight breakpoints, and four watch points.
* Enhanced Trace Module (ETM) and Enhanced Trace Buffer (ETB) support.
* System tick timer.
* Cortex-M0 Processor core
* ARM Cortex-M0 coprocessor (version r0p0) capable of off-loading the main ARM Cortex-M4 application processor.
* Running at frequencies of up to 204 MHz.
* JTAG
* Built-in NVIC.
* On-chip memory
* 1 MB on-chip dual bank flash memory with flash accelerator.
* 16 kB on-chip EEPROM data memory.
* 136 kB SRAM for code and data use.
* Multiple SRAM blocks with separate bus access. Two SRAM blocks can be powered down individually.
* 64 kB ROM containing boot code and on-chip software drivers.
* 64 bit of One-Time Programmable (OTP) memory for general-purpose use.
* Two banks (256 bit total) One-Time Programmable (OTP) memory for AES key storage. One bank can store an encrypted key for decoding the boot image.
* AES engine for encryption and decryption of the boot image and data with DMA support and programmable via a ROM-based API.
* Configurable digital peripherals
* Serial GPIO (SGPIO) interface.
* State Configurable Timer (SCT) subsystem on AHB.
* Global Input Multiplexer Array (GIMA) allows to cross-connect multiple inputs and outputs to event driven peripherals like the timers, SCT, and ADC0/1.
* Serial interfaces
* Quad SPI Flash Interface (SPIFI) with four lanes and up to 52 MB per second.
* 10/100T Ethernet MAC with RMII and MII interfaces and DMA support for high throughput at low CPU load. Support for IEEE 1588 time stamping/advanced time stamping (IEEE 1588-2008 v2).
* One High-speed USB 2.0 Host/Device interface with DMA support, on-chip full-speed PHY and ULPI interface to external high-speed PHY
* USB interface electrical test software included in ROM USB stack.
* One 550 UART with DMA support and full modem interface.
* Three 550 USARTs with DMA and synchronous mode support and a smart card interface conforming to ISO7816 specification. One USART with IrDA interface.
* Up to two C_CAN 2.0B controllers with one channel each.
* Two SSP controllers with FIFO and multi-protocol support. Both SSPs with DMA support.
* One SPI controller.
* One Fast-mode Plus I²C-bus interface with monitor mode and with open-drain I/O pins conforming to the full I²C-bus specification. Supports data rates of up to 1 Mbit/s.
* One standard I²C-bus interface with monitor mode and with standard I/O pins.
* Two I²S interfaces, each with DMA support and with one input and one output.
* Digital peripherals
* External Memory Controller (EMC) supporting external SRAM, ROM, NOR flash, and SDRAM devices.
* LCD controller with DMA support and a programmable display resolution of up to 1024 H x 768 V. Supports monochrome and color STN panels and TFT color panels; supports 1/2/4/8 bpp Color Look-Up Table (CLUT) and 16/24-bit direct pixel mapping. Available on parts LPC4357/53 only.
* Secure Digital Input Output (SD/MMC) card interface.
* Eight-channel General-Purpose DMA controller can access all memories on the AHB and all DMA-capable AHB slaves.
* Up to 164 General-Purpose Input/Output (GPIO) pins with configurable pull-up/pull-down resistors.
* GPIO registers are located on the AHB for fast access. GPIO ports have DMA support.
* Up to eight GPIO pins can be selected from all GPIO pins as edge and level sensitive interrupt sources.
* Two GPIO group interrupt modules enable an interrupt based on a programmable pattern of input states of a group of GPIO pins.
* Four general-purpose timer/counters with capture and match capabilities.
* One motor control Pulse Width Modulator (PWM) for three-phase motor control.
* One Quadrature Encoder Interface (QEI).
* Repetitive Interrupt timer (RI timer).
* Windowed watchdog timer (WWDT).
* Ultra-low power Real-Time Clock (RTC) on separate power domain with 256 bytes of battery powered backup registers.
* Alarm timer; can be battery powered.
* Analog peripherals
* One 10-bit DAC with DMA support and a data conversion rate of 400 kSamples/s.
* Two 10-bit ADCs with DMA support and a data conversion rate of 400 kSamples/s. Up to eight input channels per ADC.
* Unique ID for each device.
* Clock generation unit
* Crystal oscillator with an operating range of 1 MHz to 25 MHz.
* 12 MHz internal RC oscillator trimmed to 3 % accuracy over temperature and voltage (1.5 % accuracy for Tamb = 0 °C to 85 °C).
* Ultra-low power Real-Time Clock (RTC) crystal oscillator.
* Three PLLs allow CPU operation up to the maximum CPU rate without the need for a high-frequency crystal. The second PLL can be used with the High-speed USB, the third PLL can be used as audio PLL.
* Clock output.
* Power
* Single 3.3 V (2.4 V to 3.6 V) power supply with on-chip DC-to-DC converter for the core supply and the RTC power domain.
* RTC power domain can be powered separately by a 3 V battery supply.
* Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down.
* Processor wake-up from Sleep mode via wake-up interrupts from various peripherals.
* Wake-up from Deep-sleep, Power-down, and Deep power-down modes via external interrupts and interrupts generated by battery powered blocks in the RTC power domain.
* Brownout detect with four separate thresholds for interrupt and forced reset.
* Power-On Reset (POR).
* Available as LBGA256 package.
## Target Applications
* Secure industrial gateways
* Automotive aftermarket, including telematics
* Smart meters
* Industrial controls
* Industrial automation
* Diagnostic equipment
* White goods HMI
* Data collectors and navigation
* Electronic instruments
## Features
* Electronic instruments

expand all

Delivery

DHLPrice

UPS

FedEx

TNT

EMS

OCS

SF EXPRESS

Chipworker Certification

Ordering Information

Order Payment Shipping Package Quality Assurance

These terms and conditions are for reference only. The actual terms and conditions are subject to the sales staff's quotation.
- Please check the technical specifications of the products when ordering.
- MOQ is the minimum order quantity required to purchase each part.
- If you have special ordering instructions, please indicate them on the order page.
- Pre-Shipment Inspection (PSI) will be used when ordering.
- You can check the status of your order in the “My Order” section of your personal account.
- Orders cannot be canceled after the package has been shipped. View more >
- Works with both individual and corporate clients. View more >
- All prices on the website include 20% VAT.
- Invoices are issued in the currency specified, but payment is made in Russian rubles at the exchange rate on the day of payment.
- If you need a detailed invoice or a tax identifier, please contact us.
- Delivery will take between 1 to 2 weeks after the shipment is sent to your country.
- Your order will be processed only after the invoice has been paid.
- The tracking number will be sent to you after the order is shipped. (It may take up to 24 hours for the information to be available from the carrier.) View more >
- Carefully tested and packaged by ChipWorker
- Vacuum packed
- Anti-static packaging
- Anti-vibration foam
- Income quality control (IQC), 800+ qualified distributors.
- Authorities test the chip to ensure the quality, authenticity and safety of your device.
- Decapsulation control
- X-ray inspection
- XRF inspection
- Electrical testing
- Surface testing

Contact Us

Buy LPC43S57JET256E

Stock is limited and changes quickly. Our 24/7 online sales team is ready to respond to your inquiries and orders at any time.