SN74LVC2T45YZPR - TI

The pictures are for reference only, and the specific specifications can be found in the product manual.

Part No

SN74LVC2T45YZPR
Manufacturer

TI
ChipWorker Part#

CW1651943
Category

Logic Controller, Logic IC
Package

BGA-8
Description

TEXAS INSTRUMENTS SN74LVC2T45YZPR Transceiver, 74LVC245, 1.65V to 5.5V, DSBGA-8
Documentation

Datasheet

SN74LVC2T45YZPR Global Supplier

{{ supplierTable.supplier }}	{{ supplierTable.part }}	{{ supplierTable.availability }}	MOQ	{{ supplierTable.delivery_date }}

{{viewMore}}
{{viewMore}}
DigiKey	{{noList.partNo}} {{noList.mfr}}	0 {{ search_item }}	-	{{outStock}}
Arrow	{{noList.partNo}} {{noList.mfr}}	0 {{ search_item }}	-	{{outStock}}
Mouser	{{noList.partNo}} {{noList.mfr}}	0 {{ search_item }}	-	{{outStock}}
					{{submitRFQ}}

SN74LVC2T45YZPR Specifications

Attribute	Attribute Value

Part Number	SN74LVC2T45YZPR
Manufacturer	TI
ChipWorker Part#	CW1651943
Category	Logic Controller, Logic IC
Documentation	Datasheet
Mounting Style	Surface Mount
Number of Pins	8 Pin
Case/Package	BGA-8
Supply Voltage (DC)	1.65V ~ 5.50V
Number of Circuits	1 Circuit
Number of Channels	2 Channel
Number of Positions	8 Position
Number of Bits	2 Bit
Propagation Delay Max (tpd)	3.90 ns
Voltage Nodes	5.00 V
Data Rate	420 Mbps
Output Current Drive	-1.00 mA
Operating Temperature (Max)	85 ℃
Operating Temperature (Min)	-40 ℃
Number of Output Channels	1 Channel
Supply Voltage	1.65V ~ 5.5V
Supply Voltage (Max)	5.5 V
Supply Voltage (Min)	1.65 V
	expand all
Size-Length	1.9 mm
Size-Width	0.9 mm
Size-Height	0.3 mm
Operating Temperature	-40℃ ~ 85℃
Product Lifecycle Status	Active
Packaging	Tape & Reel (TR)
RoHS	RoHS Compliant
Lead-Free Status	Lead Free
REACH SVHC Compliance	No SVHC
Mil-Spec	Yes
REACH SVHC Compliance Edition	2015/06/15
ECCN Code	EAR99

Product Description

The SN74LVC2T45YZPR is a 2-bit dual supply Transceiver with configurable voltage-level shifting and 3-state outputs. The non-inverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8/2.5/3.3/5V voltage nodes. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
VCC Isolation - If either VCC input is at GND, both ports are in the high-impedance state
DIR Input circuit referenced to VCCA
IOFF Supports partial-power-down mode operation
Fully configurable dual-rail design allows port to operate over the full 1.65 to 5.5V supply range
10µA ICC Low power consumption
±24mA Output drive at 3.3V
Latch-up performance exceeds 100mA per JESD 17
Green product and no Sb/Br

expand all

Delivery

DHLPrice

UPS

FedEx

TNT

EMS

OCS

SF EXPRESS

Chipworker Certification

Ordering Information

Order Payment Shipping Package Quality Assurance

These terms and conditions are for reference only. The actual terms and conditions are subject to the sales staff's quotation.
- Please check the technical specifications of the products when ordering.
- MOQ is the minimum order quantity required to purchase each part.
- If you have special ordering instructions, please indicate them on the order page.
- Pre-Shipment Inspection (PSI) will be used when ordering.
- You can check the status of your order in the “My Order” section of your personal account.
- Orders cannot be canceled after the package has been shipped. View more >
- Works with both individual and corporate clients. View more >
- All prices on the website include 20% VAT.
- Invoices are issued in the currency specified, but payment is made in Russian rubles at the exchange rate on the day of payment.
- If you need a detailed invoice or a tax identifier, please contact us.
- Delivery will take between 1 to 2 weeks after the shipment is sent to your country.
- Your order will be processed only after the invoice has been paid.
- The tracking number will be sent to you after the order is shipped. (It may take up to 24 hours for the information to be available from the carrier.) View more >
- Carefully tested and packaged by ChipWorker
- Vacuum packed
- Anti-static packaging
- Anti-vibration foam
- Income quality control (IQC), 800+ qualified distributors.
- Authorities test the chip to ensure the quality, authenticity and safety of your device.
- Decapsulation control
- X-ray inspection
- XRF inspection
- Electrical testing
- Surface testing

Contact Us

Buy SN74LVC2T45YZPR

Stock is limited and changes quickly. Our 24/7 online sales team is ready to respond to your inquiries and orders at any time.